ONOFF pija seatpost Montaje Y Guía Del Usuario página 13

1 The dropper post uses internal cable routing designed to be compatible with
bicycle frames that provide for such cable routing.
DO NOT DRILL OR MODIFY YOUR FRAME
Doing so will void the warranty. Modification of your frame in any way
may result in frame failure which could result in injury or death.
Insert the cable housing through the frame cable routing until it comes over
2
the seatpost clamp. Next, insert the housing through the protection cap. Then
run the cable through the nut and, once the nut is positioned on the cable
head, insert the cable through the housing in the seat tube.
Insert the cable nut in the bottom mount housing and rotate it until it is prop-
3
erly fixed.
Pull the first cable end until the housing is fixed and fit in the bottom mount
4
gap. Then, fix the protection cap.
5 Insert the post to the seat tube and adjust the appropriate height, tighten with
the frame/saddle recommended torque.
EN
13