Installation; Inside Mount; Important - Levolor Cellular Shades Instalación

INSTALLATION

INSIDE MOUNT (IM)
STEP 1: MARKING THE BRACKET LOCATIONS
IMPORTANT: Before marking bracket locations, ensure that your bracket placement
will not interfere with any components inside the headrail.
•
Verify that your window casing has a minimum depth of ½" which allows for a
partially recessed headrail mount.
•
If flush mount (fully recessed mount) is desired, a minimum mounting depth of
2 ⁄ " is required.
1
8
•
Mark 1-2" inches from each jamb for bracket location.
•
With a pencil, mark the longer, oblong drill hole locations through the top of the
holes of the bracket, 2 holes per bracket.
•
If more than two installation brackets come with your order, space additional
bracket(s) evenly between the two end brackets, no more than 30" apart, and
mark drill hole locations.
8
Continuous Cord Loop Lift Control
Bracket
Bracket