Description Of The Appliance; Description Of Attachments; Instructions For Use; Filling The Boiler Tank Before Use - ARIETE MULTI VAPORI MV7.10 Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 32
EN
Never use the window wiper brush if the surface to be cleaned is cold; the thermal movement could cause the surface
to break, In cold seasons, where the temperature is particularly low, pre-heat the glass with steam jets, all over, from
a distance of about 40 cm.
When using for the first time or after a long pause, direct the steam jet into a container to eliminate any excess water.
Do not threaten the safety of the appliance by using parts that are not original or which have not been approved by the
manufacturer.
Unplug the appliance by gripping the plug firmly and pulling it out of the power socket; never unplug the appliance by
pulling on the power cord.
Any changes to this product not expressly authorised by the manufacturer may make safety devices inoperative and will
also render the user's warranty null and void.
Ref. Description
Steam dispenser button
A
Lock cursor
B
Gun
C
Gun nozzle
D
Handle
E
Appliance body
F
On/off light
G
Ref. Description
Extension nozzle
Hood
Round brush
Angled nozzle
Upholstery brush
Window brush
Floor brush

Filling the boiler tank before use

Remove the cap (N) from the tank (M) and fill it with water, taking care not to exceed the "
The tank (M) can be removed by pulling it out by the handle and it can be filled with mains water, even directly from the tap.
Then refit the tank (M), taking care that the bottom valves meet up with the pins in the seat of the appliance. Press the
tank down until it is completely inserted and make sure it has been correctly fitted (
Press in the cap (N).
Fit the required attachment to the gun (C) (see the "
IMPORTANT: Never use the appliance without water in the tank as this could damage the pump.
IMPORTANT: The Tank has a safety cap (O) on the back, which can be seen once the tank has been taken
out. The safety cap serves as a valve which, in the event of malfunctioning caused by excess pressure in
the boiler tank, will open to allow steam to come out. In this case, the appliance will no longer be able to
dispense steam.

DESCRIPTION OF THE APPLIANCE

DESCRIPTION OF ATTACHMENTS

INSTRUCTIONS FOR USE

ATTACHMENTS" section).
Ref. Description
Steam ready light
H
On/off switch
I
Steam dispenser dial
L
Water tank
M
Tank cap
N
Safety / boiler tank cap
O
Ref.
Description
Extension tubes
Attachment bag
Funnel
Measure
Floor cloth
Upholstery cloth
- 12 -
MAX" level on the tank (
).
2
).
1

Publicidad

Tabla de contenido
loading

Tabla de contenido