Filling The Water Tank During Use; Cleaning And Maintenance; Emptying The Water Tank; Emptying And Cleaning The Inside Of The Boiler Tank - ARIETE MULTI VAPORI MV7.10 Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 32
EN
Upholstery brush ⑤
The fabric brush can be fitted straight onto the gun nozzle (D) or to the extension tubes ⑧. When the handy cloth ⑬ is fitted,
it is possible to use the brush to remove dust and for daily cleaning of sofas, armchairs, blankets, mattresses and cushions
(
). The brush can also be used to freshen up fabrics, removing all creases. In any case, we recommend, when using
8
for the first time and during normal use, to discharge the condensation from the steam into a container so as not to wet the
fabrics (
).
9
Window brush ⑥
The fabric brush ⑤ can be fitted with a window wiper: assembly the two attachment, placing the tabs at the base of the fabric
brush inside the hooks at the base of the window wiper. Use the window wiper to restore the polished shine to windows, mir-
rors and gloss surfaces. It is also easy to use on shower cubicle glass, removing the problem of lime scale (
Floor brush ⑦
This accessory is used on extension tubes ⑧ and it has handy cloth grips that can hold, as well as the cloth provided ⑫, any
type of machine washable cloth. To fit the cloth, place the brush in the middle, lift the clips at the ends of the brush, insert a
flap of cloth and then release the clips (
Extension tubes ⑧
The extension tubes snap together and can be easily separated by pressing the release button. They are useful for reaching
high surfaces with the window wiper ⑥, using the special extension joint, or they can be used with the floor brush ⑦ (
Attachment bag ⑨
The appliance comes with a bag for the attachments, which is handy for storage as well as for keeping them close at hand (

FILLING THE WATER TANK DURING USE

If the tank (M) should remain without water during use, the appliance will vibrate and its noise will become more intense; in
this case, switch off the appliance and unplug it from the mains power before filling the tank as described in the paragraph
"INSTRUCTIONS FOR USE".
IMPORTANT: If the appliance is not promptly switched off, the pump might overheat and momentarily
cause the appliance to block. Fill the tank and wait a few moments for the appliance to start working again
normally.
We recommend checking the water level inside the appliance constantly and to fill the tank as described in the paragraph
"INSTRUCTIONS FOR USE". In this case, it will not be necessary to switch off or unplug the appliance.
Emptying the water tank (M)
In case of a long period of disuse, take out the water tank and empty it, so as to prevent the formation of scale residues,
which might affect the normal operation of the appliance.

Emptying and cleaning the inside of the boiler tank

IMPORTANT: Clean the boiler tank at least once every month so as to remove any scale residues which
might affect the normal operation of the appliance.
IMPORTANT: Switch off the appliance, unplug it from the mains power and leave it to cool before cleaning
out the boiler tank, so as to avoid the risk of scalds.
Take out the water tank (M) and unscrew the cap (O) in the rear part of the appliance (
Slowly add tap water to the boiler tank to prevent any spurts of steam; shake the appliance and turn it upside down to
empty it. Repeat the operation several times.
WARNING: Never add scale removers, vinegar or other perfumed substances to the tank, as these risk
damaging the appliance with immediate cancellation of the warranty.
Screw the cap (O) on again and refit the water tank (M).
).
11

CLEANING AND MAINTENANCE

- 14 -
).
10
).
14
).
12
).
13

Publicidad

Tabla de contenido
loading

Tabla de contenido