For your safety
Danger!
Before using the polisher, please read and
follow:
– these operating instructions,
– the "General safety instructions" on the
handling of power tools in the enclosed
booklet (leaflet-no.: 315.915/04.04),
– the currently valid site rules and the
regulations for the prevention of
accidents.
This polisher is state-of-the-art and has
been constructed in accordance with the
acknowledged safety regulations.
Nevertheless, when in use, the power tool
may be a danger to life and limb of the user
or a third party, or the power tool or other
property may be damaged. The polisher
may be used only
– used as intended,
– in perfect working order.
Faults which impair safety must be repaired
immediately.
Noise
Caution
Wear ear protection at a sound pressure
above 85 dB(A).
Measured according to EN 60745:
:
Sound pressure L
Sound power L
WA
Vibration
Weighted effective value of acceleration
according to EN 60745: 4.9 m/s²
14
dB(A)
79
PA
dB(A)
90
Intended use
This hand-operated orbit polisher is
designed
–
is designed for industrial applications,
–
for all types of polishing work, e.g.
paintwork on vehicles, furniture, metal
and stone surfaces, etc. with polishing
sponge, lambswool and wool pads
–
for use with polishing tools which are
permitted to run at a speed of at least
500 r.p.m.
Safety instructions
Danger!
When using the power tool,
wear protective equipment:
Goggles, dust mask, ear protection,
protective gloves, non-slip safety shoes.
Wear tight-fitting clothes which cannot
be caught by the polisher while you are
working.
Do not machine materials which release
hazardous substances.
Do not polish materials which contain
asbestos.
If dust is hazardous, wear a dust mask
in accordance with DIN EN 149!
Recommended filter class P2.
Always guide the polisher with both
hands. Hold the polisher in the front area
by the handle cover (1) only. Attach bail
handle (2) if the conditions at the work
place permit.
Polisher XC 3401 VRG