Using The Plug-On Transmitter; Switching The Plug-On Transmitter On/Off; Muting The Plug-On Transmitter - Sennheiser SKP 500 G2 Manual De Instrucciones

All manuals and user guides at all-guides.com

Using the plug-on transmitter

Switching the plug-on transmitter on/off

The transmitter can only be switched off when the standard
display is shown on the display panel. When in the
operating menu, briefly pressing the
cancel your entry (ESC function) and return you to the
standard display with the last stored settings.
Note:
Remove the batteries or the accupack when the
transmitter will not be used for extended periods of
time.
Press the ON/OFF button
¶
on. The red LED lights up.
To switch the transmitter off, press the
º
until "OFF" appears on the display. The red LED
goes off.

Muting the plug-on transmitter

The transmitter has a MUTE
the audio signal without switching the transmitter off.
µ
Set the MUTE switch
"MUTE" display appears on the display panel. Provided
that the pilot tone function is activated on both the
transmitter and the receiver, the "MUTE" display also
appears on the receiver display panel.
12
ON/OFF button will
º
to switch the transmitter
¶
º
ON/OFF button
switch that noiselessly mutes
to the position 'MUTE'. The
µ
¶