Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
3.
Hook the speed dome to the bracket with supplied safety rope.
4.
Route and connect the cables through the head cover and bracket.
Note:
Waterproof treatment is required for cable connectors. Refer to Section 2.3 and 2.4 for details.
5. Align the speed dome with the head cover. Use the wrench to tighten the lock screws ①.
2.2 Pendant Mounting
Before you start:
The bracket is not included in the package. You need to purchase one in advance.
Steps:
1.
Drill four holes on the ceiling to match those on the pendant mount bracket.
Figure 2-3 Install Head Cover
Figure 2-4 Use Safety Rope to Hook the Camera to the Bracket
Figure 2-5 Connect the Cables
Figure 2-6 Secure the Speed Dome
6
Publicidad
Tabla de contenido
