Philips FC6055 Manual De Instrucciones página 12

ENGLISH
12
Problem
The appliance
does not
clean
floors/the
suction power
is low.
Causes
The appliance has not been
placed properly on the
charging unit.
The contact strips on the
appliance and on the charging
unit are dirty.
The adapter has not been
inserted (properly) into the
wall socket.
If this problem is not caused
by any of the factors
mentioned above, please
contact the Philips Customer
Care Centre in your country.
The dust compartment is full.
The batteries are not fully
charged.
The filter is dirty.
The nozzle is clogged.
Solutions
Make sure that the appliance
is placed properly on the
charging unit. The charging
light will go on to indicate that
the appliance is charging.
Push the on/off slide backward
to put it in the 'off' position.
Make sure the slide is in the
'off' position during charging.
Wipe the dirt off the contact
strips with a dry cloth.
Insert the adapter into the
wall socket (properly).
Empty the dust compartment
(see chapter 'Cleaning').
Charge the appliance (see
chapter 'Preparing for use').
Clean the filter and the filter
holder (see chapter
'Cleaning').
Remove the obstruction from
the nozzle.