Problem
Causes
Dust escapes
The filter holder has not been
from the
placed properly in the dust
appliance.
compartment.
The filter holder has not been
placed in the dust
compartment at all.
The filter is not in the correct
position.
The dust compartment is full.
The appliance
The dust compartment is full.
does not suck
up liquid.
Liquid leaks
The filter is wet.
from the
appliance.
The filter has not been
installed.
The filter holder is not in the
correct position.
The maximum amount of
liquid has been exceeded.
The surface is
The squeegee has not been
still very wet
used.
after
vacuuming.
ENGLISH
Solutions
Reinsert the filter holder (see
chapter 'Cleaning').
Place the filter holder in the
dust compartment (see
chapter 'Cleaning')rtment.
Fasten the filter in the filter
holder by turning it clockwise
and put the filter holder into
the dust compartment.
Empty the dust compartment
(see chapter 'Cleaning').
Empty the dust compartment
(see chapter 'Cleaning').
The filter must be dry before
you place it back into the
appliance.
Install the filter before
switching the appliance on to
suck up liquid.
Place the filter holder in the
correct position.
Empty the dust compartment.
Do not let the dust
compartment fill up with liquid
beyond the maximum
indication line.
Always use the squeegee
when sucking up liquid.
13