ShenPaz Focus 4010 Manual De Instrucciones página 22

7. Options mode
The Options mode
Provides the user with very valuable and convenient means of testing the equipment. It
is designed in order to assist the end-user to verify, and hence to define exactly, the
probable cause of a malfunction. Thus, when a malfunction is suspected, the user can
verify whether the various subsystems of the furnace function properly.
It is recommended that, whenever a problem occurs, an appropriate diagnosis will be
performed prior to a request for assistance.
Access to the Diagnostics Mode is achieved by pressing "menu" button and then arrow
down until reaching "diagnostic Menu" when the furnace is in the Standby
After you will enter the diagnostic mode the word "diagnostic menu" would be
displayed on the top of the screen
By pressing each one of the menu you will activate the sub menu, all the explanation
appear in the screen to activate the request menu.
 Note we highly recommended you to exchange your
muffle after 3500 Working hours above 500 degrees-
your furnace have a counter that show you all the
information" hours meter"
FOCUS 4010/HT Dental Porcelain Furnace
:
Page 22 Manual version 20.08.2015