Grizzly ERT 450/8 Traducción Del Manual De Instrucciones Original página 120

GB
it is damaged, incomplete or
has been modified without the
approval of the manufacturer.
Never operate the equipment if
the protective equipment is de-
fective. Before starting up the
equipment always check that
the equipment is in a perfectly
safe condition, especially the
power cable, the switch and
the protective cover. Never dis-
connect or remove any protec-
tive devices. This ensures that
the equipment remains safe.
Use:
• Always maintain a secure foot-
ing while working. Be espe-
cially careful when working on
a sloping terrain.
This enables you to control the
equipment better in unexpect-
ed situations.
• Do not operate the equipment
if you are tired or lack concen-
tration and after having drunk
alcohol or taken medication.
Always take a work break in
due time. A moment of care-
lessness when using the
equipment can result in serious
injury.
• Do not use the equipment
while it is raining, in poor
weather conditions and when
the surrounding area is wet.
Only work when the light condi-
tions are good.
There is a risk of accidents.
• Always keep the cutting line
well away from the body, par-
ticularly the hands and feet,
when you switch on the motor
and while the motor is running.
120
Risk of injury from cuts.
• Never start the equipment
when it is turned over or not in
the correct working position.
• Switch off the motor and dis-
connect the plug from the
mains socket:
- Whenever you are not using
the equipment
- If the equipment is left unat-
tended
- When the equipment is being
cleaned, maintained or is to
be inspected
- When relocating the equip-
ment
- If the power or extension ca-
ble is damaged
- When you remove or ex-
change the cutting device or
manually adjust the length of
the cutting line
• Check when starting up and
working with the cutting head
that it does not come into con-
tact with stones, rubble, wire or
other foreign bodies. Danger
due to materials blown out of
machine.
• Never try to stop the cutting
device (cutting line) with your
hands. Always wait until it has
stopped rotating. Contact with
the cutter can result in injury.
• Only use an original cutting
line. The use of a metal wire
instead of the nylon line is im-
permissible. This can result in
serious injury.
• Do not use the equipment to
cut grass that is not growing on
the ground, e.g. grass on walls,
rocks, etc. Using the equip-
ment for purposes other than