Replacement Parts/Accessories; Disposal And Protection Of The Environment; Technical Data - Grizzly ERT 450/8 Traducción Del Manual De Instrucciones Original

GB
come deformed, thereby changing its
dimensions and its safety properties.
Replacement parts/
Accessories
Spare parts and accessories
can be obtained at
www.grizzly-service.eu
If you do not have internet access, please
contact the Service Centre (see "Grizzly
Service-Center").
Or obtain a 1.4 mm nylon string from a
specialised dealer and wind it onto the
spool yourself. If you do, mind to use no
more than 2 x 5 m of string and to wind it
strictly parallel along the two thread chan-
nels and against the direction of motor ro-
tation. The arrow on the protective cover
indicates the direction of motor rotation.
Disposal and protection
of the environment
Dispose of the trimmer, its accessories
and the packaging in an environment-
friendly manner.
Electrical appliances must not be
disposed of with the domestic waste
Hand in a redundant trimmer to a recy-
cling centre. The plastic and metals can
then be sorted out and graded for recy-
cling. Our Service Centre will be happy to
answer any questions in this respect.
Defective units returned to us will be dis-
posed of for free.
126

Technical data

Electric lawn trimmer ........... ERT 450/8
Rated input voltage.............230 V~, 50 Hz
Power input..................................... 450 W
Idling speed ............................10000 min
Weight ............................................2.3 kg
Cutting circle dual line ................. 300 mm
Dual line................2 x 5 m, fully automatic
Line thickness dual line ................ 1.4 mm
Protection Class .................................
Protection category ........................... IP20
Sound power level (L
guaranteed ............................. 96 dB(A)
measured . 93.6 dB(A); K
Sound pressure level
(L ) .................. 85 dB(A); K
pA
Vibration (a )
h
at the upper handle...................... 3.5 m/s
at the additional handle ............... 1.5 m/s
Noise and vibration values have been
determined according to the standards
and regulations mentioned in the declara-
tion of conformity. The vibration and noise
measuring processes in accordance with
EN 786, appendices D and E, were com-
pleted successfully.
Technical and optical changes may be
undertaken in the course of further de-
velopment without notice. All dimensions,
references and information in this instruc-
tion manual are therefore not guaranteed.
Legal claims made on the basis of the
instruction manual can therefore not be
considered as valid.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another. The
stated vibration emission value may also
be used for a preliminary exposure as-
sessment.
)
WA
=1.98 dB(A)
WA
= 3 dB(A)
pA
K =1.5 m/s
-1
II
2
2
2