Best Cutting Practice; Cleaning And Maintenance - Grizzly ERT 450/8 Traducción Del Manual De Instrucciones Original

GB
Fully automatic dual line system
The equipment features a fully automatic
dual line system.
The lines will automatically elongate every
time you turn on the appliance. To support
proper line elongation, ensure that the coil
has stopped moving completely before
turning on the appliance again.
If the lines should be longer that defined
by the cutting circle then they will be au-
tomatically cut to the correct length by the
line cutter
Regularly check the nylon lines for
damage and whether the lines still
have the correct length defined by
the line cutter
When no line ends are visible:
• Renew the line spool (see "Cleaning
and maintenance").
Adjusting the line length manually:
• Disconnect the plug from the mains
socket!
Press the retaining head (
lease it again and pull the ends of the
cord out.

Best cutting practice

WARNING. Danger of injury!
- Before starting the trimmer
check that the cutting head
will not come into contact with
stones, rubble or other foreign
bodies.
- Switch on the trimmer before you
approach the grass that is to be
cut
- Do not cut moist or wet grass.
- Do not overload the trimmer dur-
ing operation.
- Avoid contacting solid obstacles
124
Long grass should be cut at layers from
top to bottom. Use the edge of the protec-
tive cover or the spacer bow to maintain
the correct distance.
17) re-
Cleaning and
maintenance
(stones, walls, fences, etc.) since
this would make the string wear
out too quickly. Use the edge of
the protective cover to keep the
appliance away from such obsta-
cles.
- Always trail the extension cable
behind you. Do not pass the op-
erating trimmer over the exten-
sion cable as the cable could be
damaged.
Always disconnect the plug from
the mains socket before working
on the trimmer.
Any work that is not described
in these Instructions must be
carried out by a servicing agen-
cy authorized by us. Only use
original parts and be very care-
ful with the line cutter during in-
stallation work. Danger of injury!
Cut the grass
by swaying the
trimmer side-
ways to the
right and left.
Cut slowly, tip-
ping the appli-
ance fowards
by about 30°.