Brita PURITY Quell ST Manual De Instrucciones página 26

Ocultar thumbs Ver también para PURITY Quell ST:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 97
5.2 Commissioning the filter systems with measuring and display unit
Representation in operating mode
Local Carbonate
Hardness Set
Carbonate hardness
The units of carbonate hardness or total hardness can be set as required to German °dH (= display
setting °KH, °DH), English (°e = Clark) (= display setting °EH), French (°f) (= display setting °FH),
American (grains per gallon) (= display setting gpg) or international hardness values (mg/l CaCO
(= display setting mg/L).
If the setting for the type of hardness (= unit) is changed while the filter is operating, the values that
were set originally are converted automatically.
Bar chart
Representation of the remaining capacity using bar charts. After installation of a new filter system or
after a filter change, the symbolised filter cartridge is completely filled with 10 bars.
Bypass proportion in percentage
The by-pass proportion is defined as the proportion of decarbonised water in the total amount of
filtrate and is indicated as a percentage.
EN
Flow symbol
When water is removed via the filter system, a graphic wave is shown on the display.
Available remaining capacity of the filter cartridge
The remaining capacity of the filter cartridge is shown in litres or in US gallons, depending on which
has been selected.
When water is removed, it counts backwards in 1 litre or 1 US gallon stages. If the cartridge is
already exhausted, the capacity is indicated as being negative by flashing.
With a remaining capacity of 20% the last two bars in the bar chart start to flash.
With a remaining capacity of 10% the last bar in the bar chart flashes with the two change arrows.
From a remaining capacity of 0% the negative bars and the change arrows flash alternately with
the remaining capacity shown in negative.
Local Carbonate
Hardness Set
Change arrow
24
Bar Display
Available residual
Date Field: Installation or
capacity in litres
last filter change date
Bar Display
Available residual
Date Field: Installation or
capacity in litres
last filter change date
Type/
By-Pass Proportion
Flow Symbol
Type/
By-Pass Proportion
)
3

Publicidad

Tabla de contenido
loading

Tabla de contenido