1
Connect cord to razor. Plug into any 120V to 240V
AC/DCoutlet. Use only the cord provided. The indicator
lightwill turn green and "20" starts blinking. As charging
continues, more and more sections will start blinking
toindicate what level of the batteries have been charged.
An adaptor plug may be necessary for cord usage in
some foreign countries.Your new razor will automatically
convert internally to work on 100V to 240V AC/DC
Systems.
2
First time charging and recharging after non-use for
1 month or more requires a full 4 hours.When batteries
have been fully charged, indicator light turns green, blinks
and "FULL"appears on the display.
Recharging
1
After initial 4-hour charge, recharging requires approxi-
mately 1/2 hour.
2
Disconnect the cord. Do not keep razor permanently
onnected to the outlet.
Quick Charge
When batteries are totally depleted, recharging the razor
for approximately 6 minutes gives enough energy for a
3 minute cordless shave.
PUT IT TO THE TEST & SHAVING TIPS
21 Day Trial and Conversion Process.
It is a fact that your skin and beard need time to adjust to
a new shaving system.
Use your new razor exclusively for 3 weeks to fully enjoy
the closeness of a Norelco shave.*
At first you may not get as close a shave as you expect,
or your face may even become slightly irritated.This is
normal since your beard and skin will need time to
adjust. Invest 3 weeks and you'll soon experience the full
enjoy of your new razor.
* Stick with it! If you alternate shaving methods during the
11