TFK dot 2 Instrucciones De Uso página 9

USER AND ASSEMBLY INSTRUCTIONS
Wheel assembly
-(Fig.I) Insert the rear wheels (1) while pressing and holding the red
push button (2). When the wheel is fully positioned, release the
button (2) and check that the wheel is set correctly. To release, keep
the red button (2) pressed and pull off the wheel.
-(Fig.II) Insert the front wheels (3) into the holder until they audibly
engage. To release, press the red button and pull out the wheel. The
front wheels can either be fixed into position (push the switch (4)
downwards) or rotatable (release the switch (4)).
Set-up
-(Fig.III) Pull the telescope joint back until it audibly engages at (5).
Then press the two buttons (7). These remain pressed automatically!
Then pull the handles upwards until both buttons (7) engage again.
Then move the safety catch (Fig. IV, 6) upwards until it engages.
Fold together
-(Fig.IV) Release the safety catch (6). Then press the two buttons (7).
These remain pressed automatically! Fold the handle forward until it
clicks into place again. Then release the telescopic lock (Fig.III, 5)
and push the trolley together.
-(Fig.V) Press the red button (8) to remove the belly bar.
-(Fig.VI) The seat back is continually adjustable with the strap. Press
the two plastic parts (9) together and adjust the seat angle with the
strap.
-(Fig.VII) Apply the parking brake by pushing the red lever (10)
downwards. To release, push the green lever (11) downwards.
Please always lock the rear wheels when you put your child in the
trolley and and while taking the child out!