Publicidad
Idiomas disponibles
Idiomas disponibles
2. Attaching the Interior Cabinet Shelves
1. Push shelves (Fig. C) in to place on left and right sills until
firmly in place.
3. Attaching the optional Light Spacers
(when using the CLL20TW Light
Fixture)
1. Place spacers on top of cabinet even with edge of flange
as shown - Fig. D.
2. Attach spacers to the wall using the screws and anchors
supplied with Light.
3. Install Light Fixture over spacer so that the tabs on the
spacer fit the slots in the light.
4. Fasten the Light Fixture to the Spacers using the #8 x 1/2"
hi-lo thread screws.
Fig. C
1/4"
Glass
Shelves
4" Deep
Fig. D
CLL20TW Light Fixture
4
2
Light
Spacers
(SS284) Supplied
with light fixture.
3
3
4. Door Adjustment and Mounting
B
B
A. This screw
releases the door
from the cabinet
and allows up and
down adjustment.
See Figure E & F.
B. These screws
allow you to
plumb the door as
shown in Figure G.
C. The screws you
use for attaching
the hinges as
shown in Figure H.
(Supplied with
hinges)
Fig. H
6-32 x 3/8"
Part
SS679
#8 x 1" screws and
anchors supplied
with Light Fixture
SS284 Spacers supplied
with light fixture.
A
Fig. E
Fig. F
Fig. G
8-32 x 1/2"
Part
SS345
1
SS422 CLR RECESS CABINET
Publicidad
