Descargar Imprimir esta página

Funzione Sleep (Autospegnimento); Regolazione Del Volume; Montaggio A Rack; Istruzioni Per Il Montaggio - Paso P8083 Serie Manual Del Usuario

Publicidad

Un altro modo per memorizzare una stazione radio è il seguente:
Premere il tasto MEMORY (D): sul display appare la scritta MEMO
1.
lampeggiante;
2.
Premere il tasto MemUp (F) fino a selezionare il numero del canale
desiderato (da 1 al 10);
3.
Ripremere nuovamente il tasto MEMORY (D) per memorizzare; sul
display la scritta MEMO scomparirà.

5.4 Funzione SLEEP (autospegnimento)

Premendo il tasto SLEEP (H) è possibile attivare lo spegnimento automatico
a tempo del sintonizzatore. Il tempo massimo previsto è di 90 minuti, che
può essere ridotto a passi di 10 ogni volta che viene premuto il tasto.
Procedere come segue:
• Premere il tasto SLEEP, il display mostrerà la scritta SLEEP ed il numero
90 come indicazione dei minuti previsti prima dello spegnimento.
• Premere più volte il tasto SLEEP per impostare il tempo desiderato; i
minuti saranno ridotti a passi di 10.
• Impostato il tempo desiderato, dopo due secondi il display tornerà a
mostrare la frequenza del canale musicale in corso. La scritta SLEEP
piccola resterà attiva.
• Per disattivare la funzione di autospegnimento, basta premere
nuovamente il tasto SLEEP (la scritta SLEEP scomparirà dal display).

5.5 Regolazione del volume

Ruotare la manopola LEVEL (G) per regolare e controllare il volume
desiderato.
6.

MONTAGGIO A RACK

6.1 Istruzioni di montaggio
Montare l'apparecchio a rack tramite
le apposite viti (A) e le rondelle (B),
come in Figura 6.1.1.

CARATTERISTICHE TECNICHE

Alimentazione da rete
Alimentazione esterna in corrente continua
Consumo con alimentazione da rete
Consumo con alimentazione esterna
Livello uscita lettore CD/USB/SD
Livello uscita sintonizzatore AM/FM
Peso (netto)
Peso (imballato)
Dimensioni
Dimensioni imballo
T
E
E
H
S
A
T
A
D
Another way of storing a radio station is the following:
1.
Press the MEMORY key (D): the word MEMO will start to flash on
the display;
2.
Press the MemUp key (F) until you reach the channel number you
require (from 1 to 10);
Press the MEMORY key (D) again to store; the word MEMO will
3.
disappear from the display.
5.4 SLEEP Function (auto switch-off)
By pressing the SLEEP key (H) you can programme the tuner to switch off
automatically after a given period of time. The maximum time permitted
is 90 minutes, which is reduced by steps of 10 each time you press the
key. Proceed as follows:
• Press the SLEEP key. The word SLEEP will appear on the display,
together with the number 90 indicating the number of minutes to
switching off.
• Press the SLEEP key repeatedly to set the time you require. The number
of minutes will be reduced in steps of 10.
• Set the required time. After two seconds the frequency of the current
music channel will be shown once again on the display. The word SLEEP
will continue to be visible.
• To de-activate the switching off function simply press the SLEEP key
again (the word SLEEP will no longer be displayed).

5.5 Volume control

To adjust the volume to the required level, turn the LEVEL knob (G).
P8083
230 V
/ 115 V
±10% 50/60 Hz
AC
AC
24 V
DC
45 VA
700 mA (max)
250 mV
450 mV
4,5 kg
5,5 kg
482 x 44 x 285 mm
530 x 125 x 370 mm
6.

RACK MOUNTING

6.1 Mounting instruction
Fix the tuner to the rack by means of
the screws (A) the relative washers
(B), see figure 6.1.1.
Fig. 6.1.1

TECHNICAL SPECIFICATIONS

Mains power supply
DC External power supply
Mains consumption
CD/USB/SD player output level
AM/FM tuner output level
Weight (packaged)
Package dimensions
P8083
DC consumption
Weight (net)
Dimensions
7

Publicidad

loading