Introduction; Intended Use; Features; Package Contents - Parkside PDSLG 20 A1 Traducción Del Manual De Instrucciones Original

Introduction

Congratulations on the purchase of your new appli-
ance. You have chosen a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all the operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.

Intended use

This charger is intended exclusively for charging
PARKSIDE PAP 20 A1/A2/A3/B1/B3 series
batteries.
This rechargeable battery is suitable for:
The appliance is not intended for commercial use.
Any other usage or modification of the appliance
is deemed to be improper and carries a significant
risk of accidents. The manufacturer accepts no
responsibility for damage attributable to misuse.

Features

LED 3
LED 2
LED 1
Dual high-speed charger

Package contents

1 dual quick battery charger
1 set of operating instructions
│ GB │ IE
■ 2

Technical data

Dual Quick Battery Charger PDSLG 20 A1
INPUT
Rated voltage 230–240 V ∼, 50 Hz (AC)
Rated power
consumption 200 W
Fuse (internal) 3.15 A
OUTPUT (both outputs)
Rated voltage 21.5 V
Rated current 4.5 A
Protection class II /
Charging time approx. 30 min
(2 Ah – Ready to use)
approx. 35 min (2 Ah – 100%)
approx. 45 min (3 Ah)
approx. 60 min (4 Ah)
General safety
information
WARNING!
■ Read all safety warnings and all instructions.
Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious
injury. Save all warnings and instructions
for future reference.
Use and handling of the cordless
electrical appliance
a) Charge a rechargeable battery unit using
only the charger recommended by the manu-
facturer. Chargers are often designed for a
particular type of rechargeable battery unit.
There is the danger of fire if other types of
rechargeable battery units are used.
T3.15A
(DC)
(double insulation)
PDSLG 20 A1