Scope Of Delivery; Proper Use; General Power Tool Safety Warnings - Scheppach AB1600 Traducción De La Instrucción De Original

3. On / Off switch
4. Additional handle
5. Tool holder
6. Locking bolt
7. Oil fill opening / sight glass
8. Point chisel

3. Scope of delivery

• Demolition Hammer
• Point chisel Ø 30 L390 (c)
• Flat chisel Ø 30 L390 (d)
• Oil can (g)
• Carrying case
• Mounting key (f)
• Carbon brushes (2x) (e)
• Operating manual

4. Proper use

The machine is intended for heavy chis-
elling and demolition work as well as for
driving in and compacting with the appro-
priate accessories.
The equipment is allowed to be used only
for its prescribed purpose. Any other use
is deemed to be a case of misuse. The
user/operator and not the manufacturer
will be liable for any damage or injuries of
any kind resulting from such misuse.
An element of the intended use is also the
observance of the safety instructions, as
well as the assembly instructions and op-
erating information in the operating man-
ual.
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
Persons who operate and maintain the
machine must be familiar with the manu-
al and must be informed about potential
dangers.
In addition, the applicable accident pre-
vention regulations must be strictly ob-
served.
Other general occupational health and
safety-related rules and regulations must
be observed.
The liability of the manufacturer and re-
sulting damages are excluded in the event
of modifications of the machine.
The machine may be operated only with
original parts and original accessories of
the manufacturer.
The safety, work and maintenance in-
structions of the manufacturer as well as
the dimensions indicated in the Technical
Data section must be adhered to.
Please note that our equipment has not
been designed for use in commercial,
trade or industrial applications. Our war-
ranty will be voided if the equipment is
used in commercial, trade or industrial
businesses or for equivalent purposes.
5. General Power Tool Safe-
ty Warnings
m ATTENTION! The following basic
safety measures must be observed
when using electric tools for protec-
tion against electric shock, and the
risk of injury and fire. Read all these
notices before using the electric tool
and keep the safety instructions for
later reference
GB | 37