Nostalgia Electrics Vintage Collection CCP610 Instrucciones Y Recetas página 10

Assembly of Wheels
1. Slide one #5 Flat Washer onto Axle Bolt (F) and
insert Axle Bolt (F) into Wheel (G).
2. Put on one #4 Flat Washer. Insert Axle Bolt (F)
with Wheel (G) into Base Support (I).
3. Add a second #4 Flat Washer and #7 Nut Cap. Use
Wrench (H) to tighten the #7 Nut Cap.
4. Repeat steps to attach second Wheel (G) onto the
other side of the Base Support (I).
(F)
Axle
Bolt
(#5)
Flat
Washer
Assembly of Main Unit
1. Place Main Unit (A) onto the top of the Concession Stand (C).
2. Ensure that the two inserting pins at the bottom of the Main
Unit (A) line up correctly so that Main Unit (A) can be locked
under the beam of the Concession Stand (C).
(#4)
Flat
Washer
(G)
Wheel
(I)
Base
Support
(#6)
Nut
Cap
8