Dash Disassembly - Metra 99-6520B Instrucciones De Instalación

1. Unclip and remove the trim panel
along the top of the glove box over
to the passenger side a/c vent.
(Figure A)
2. Unclip and remove the small trim
panel to the left of the hazard
button. (Figure A)
3. Remove (2) Phillips screws
securing the climate/radio panel
then unclip and remove the panel.
(Figure B)
4. Remove (4) Torx screws securing
the radio chassis. (Figure C)
Continued on next page

Dash Disassembly

(Figure A)
99-6520B
(Figure B)
2
(Figure C)