Denon AVR-770SD Instrucciones De Operación página 24

ENGLISH
4
(Remote control unit)
5
(Remote control unit)
6
(Remote control unit)
7
(Remote control unit)
2 Dialogue Normalization
The dialogue normalization function is activated automatically when playing Dolby Digital program sources.
Dialogue normalization is a basic function of Dolby Digital which automatically normalizes the dialog level
(standard level) of the signals which are recorded at different levels for different program sources, such as DVD,
DTV and other future formats that will use Dolby Digital.
These contents can be verified with the ON SCREEN button.
Display
OFFSET - 4dB The number indicates the normalization level when the currently playing
program is normalized to the standard level.
24
Display the surround parameter menu.
Select the various parameters.
Adjust the parameter settings.
Press the SURROUND PARAMETER button to finish
surround parameter mode.
II
Dolby Surround Pro Logic mode
2
STEREO 5ch/6ch DIRECT /STEREO SURROUND DOLBY/DTS SURROUND MODE STATUS TONE CONTROL BAND TUNING
MASTER VOLUME
AV SURROUND RECEIVER AVR-770SD
FUNCTION / SELECT
DVD
STANDBY SIGNAL DETECT OUTPUT AUTO PCM
DIG AUTO
ON / STANDBY PHONES SURROUND BACK INPUT MODE DIGITAL
¢
£ OFF
1
1
Select the function to which the component
you want to play is connected.
Example: DVD
FUNCTION / SELECT
(Main unit) (Remote control unit)
2
II
Select the Dolby Surround Pro Logic mode.
DOLBY/DTS
SURROUND
(Main unit) (Remote control unit)
• The Dolby Pro Logic II indicator lights.
Light
Display
DOLBY PL c
PL C DVD
3
Play a program source with the
mark.
• For operating instructions, refer to the
manuals of the respective components.
The Dolby Surround Pro
II
Logic Cinema or Music
2
mode can be chosen
directly by pressing the
CINEMA or MUSIC button
1
on the remote control unit
during playback in the
Dolby Surround Pro Logic
II
mode.
6
4, 8
5, 7 5, 7
6
4
Select the surround parameter mode.
Display
MODE cinma
(Remote control unit)
To perform this operation from the remote
control unit, check that the mode selector
switch is set to "AUDIO".