Troubleshooting - Worx WX252 Manual Original

FOR BATTERY TOOLS
The ambient temperature range for the use and storage of tool and battery is 0℃-
45℃.
The recommended ambient temperature range for the charging system during
charging is 0℃-40℃.
TROUBLE SHOOTING
problem
Battery will not
charge
Switch cannot be
pressed
XTD Driver stops
during driving
screws
EN
DECLARATION OF CONFORMITY
14
We,
Positec Germany GmbH
Grüner Weg 10, 50825 Cologne,
Germany
Declare that the product,
Description
Screwdriver
WX252 WX252.1 (250-
Type
269- designation of machinery,
representative of Cordless Screw
Driver)
Function
loosening screws, nuts
Complies with the following Directives,
2006/42/EC, 2014/30/EU,
2011/65/EU&(EU)2015/863
Standards conform to
EN 62841-1
EN 62841-2-2
EN 55014-1
EN 55014-2
Possible cause
1. Charger not
plugged into a
working outlet.
2. Surrounding air
temperature is too
hot or too cold
Forward/Reverse
switch at middle
position
XTD Driver battery is
out of power
Battery-powered
Tightening and
Solution
1. Plug charger into a working outlet.
Check current by plugging in a lamp.
2. Move charger to an appropriate
place which temperature is suitable
for the charger.
Make sure switch is on Forward or
Reverse rotation according to project
need.
Make sure XTD Driver is fully charged
before using it.
The person authorized to compile the
technical file,
Name Marcel Filz
Address Positec Germany GmbH
Grüner Weg 10, 50825 Cologne,
Germany
2019/11/26
Allen Ding
Deputy Chief Engineer, Testing &
Certification
Positec Technology (China) Co., Ltd
18, Dongwang Road, Suzhou Industrial
Park, Jiangsu 215123, P . R. China