Worx WX252 Manual Original página 9

g) Keep power tool clean and dry.
h) Wipe the charging terminals
with a clean dry cloth if they
become dirty.
i) Power tool needs to be
charged before use. Always
refer to this instruction and
use the correct charging
procedure.
j) Do not maintain power tool on
charge when not in use.
k) After extended periods of
storage, it may be necessary
to charge and discharge the
power tool several times to
obtain maximum performance.
l) Battery gives its best
performance when it is
operated at normal room
temperature (20 °C ± 5 °C).
m) When disposing of cells,
keep cells of different
electrochemical systems
separate from each other.
n) Recharge only with the charger
specified by WORX. Do not use
any charger other than that
specifically provided for use
with the equipment. A charger
that is suitable for one type of
battery may create a risk of fire
when used with another battery.
o) Keep power tool out of the
reach of children.
p) Retain the original product
literature for future reference.
q) Dispose of properly.
r) Do not mix cells of different
manufacture, capacity, size or
type within a device.
s) Do not use any cell which is
not designed for use with the
equipment.
EN
9