Filling With Water - Beko CEG7425B Manual Del Usuario

Ocultar thumbs Ver también para CEG7425B:
Tabla de contenido

Publicidad

4
Setting up
In the case of newly
opened, not yet
completely filled
C
milk packages, it is
possible that milk
will drip out of the
dispenser unit after
preparation of a
coffee speciality.
Milk is a sensitive
foodstuff. Always
pay attention to
cleanliness when
C
dealing with milk.
Open milk packages
with clean hands
and tools to prevent
germs from getting
into the milk.
4.5 Filling with water
CAUTION: Milk,
mineral water or
A
other liquids can
damage the water
tank or the coffee
machine.
18 / EN
A
A
A
To fill the water tank, proceed as
follows:
1. Push the coffee dispensing unit
(3) into the uppermost position.
2. Remove the water tank (7)
from the appliance.
3. Fill the water tank with fresh
water up to its maximum on the
lower edge of the filling hole.
Fully Automatic Coffee Maker / User Manual
CAUTION: Only fill
the water tank with
fresh, cold water.
CAUTION:
Observe the maxi-
mum filling level of
1.4 litres.
CAUTION: During
initial startup (or
when the water
tank was previously
emptied completely),
water intake can be
slowed down. In this
case, it is helpful to
switch the device off
and on again.

Publicidad

Tabla de contenido
loading

Tabla de contenido