Tabla de contenido
Publicidad
5
Operation and use
2. Press the button 4 repeatedly
until the required cup symbol
for the desired ground coffee
quantity is displayed.
4
3. Place an appropriate cup under
the coffee delivery spout (e.g.
coffee mug).
4. Fill the coffee powder shaft
with fresh powdered coffee.
5. Press "
" (button 6) and keep
it pressed until the desired cup
filling amount is reached.
6. Release the button. The
desired cup filling level is now
stored.
Repeat the
C
procedure if you also
wish to change the
filling level for the
other cup sizes.
Fully Automatic Coffee Maker / User Manual
C
C
5.14 Preparing
coffee specialities
The milk system must be connected
6
in order to dispense coffee
specialities.
More information can be found in
chapter 4.4.
C
All values remain
stored even when
the coffee machine is
switched off. Should
you change your cup
size, you can adapt
the cup filling level
individually at any
time.
The
stored
filling
levels
each individual cup
symbol only applies
in powder mode.
Do not use soya or
rice milk because
good frothing results
are not possible with
these products.
35 / EN
cup
for
Publicidad
Tabla de contenido
