Troubleshooting - Beko DN162230DJIZX Manual Del Usuario

Ocultar thumbs Ver también para DN162230DJIZX:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 178
7

Troubleshooting

Please review this list before calling the service. It will save your time and money. This list
includes frequent complaints that are not arising from defective workmanship or material
usage. Some of the features described here may not exist in your product.
The refrigerator does not operate.
• The plug is not inserted into the socket correctly. >>>Insert the plug into the socket
securely.
• The fuse of the socket which your refrigerator is connected to or the main fuse have blown
out. >>>Check the fuse.
Condensation on the side wall of the fridge compartment (MULTIZONE, COOL
CONTROL and FLEXI ZONE).
• Ambient is very cold. >>>Do not install the refrigerator in places where the temperature
falls below 10 °C.
• Door has been opened frequently. >>>Do not open and close the door of refrigerator
frequently.
• Ambient is very humid. >>>Do not install your refrigerator into highly humid places.
• Food containing liquid is stored in open containers. >>>Do not store food with liquid
content in open containers.
• Door of the refrigerator is left ajar. >>>Close the door of the refrigerator.
• Thermostat is set to a very cold level. >>>Set the thermostat to a suitable level.
• Compressor is not running
• Protective thermic of the compressor will blow out during sudden power failures or plug-
out plug-ins as the refrigerant pressure in the cooling system of the refrigerator has not
been balanced yet. The refrigerator will start running approximately after 6 minutes. Please
call the service if the refrigerator does not startup at the end of this period.
• The fridge is in defrost cycle. >>>This is normal for a full-automatically defrosting
refrigerator. Defrosting cycle occurs periodically.
• The refrigerator is not plugged into the socket. >>>Make sure that the plug is fit into the
socket.
• Temperature settings are not made correctly. >>>Select the suitable temperature value.
• There is a power outage. >>>Refrigerator returns to normal operation when the power
restores.
The operation noise increases when the refrigerator is running.
• The operating performance of the refrigerator may change due to the changes in the
ambient temperature. It is normal and not a fault.
The refrigerator is running frequently or for a long time.
39
EN

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Dn162020b

Tabla de contenido