Grundig MT 6742 Manual Del Usuario página 27

OPERATION ______________________________
Cutting hair ...
... using the ceramic/stainless steel cut-
ting head (width 38 mm).
A
1 If necessary, remove the attachment
by pressing in both side catches
and lifting off.
2 Insert ceramic/stainless steel cutting
head carefully at the top and
A
press down until it clicks into place.
3
Place a towel around the neck and
shoulders of the person whose hair
you are trimming.
4
Make sure the person is seated so
that their head is roughly at your eye
level. Before trimming, comb the hair
so that it falls naturally and you can
see the direction in which it grows.
5
Press the
appliance.
6
Begin use.
7
Press the
appliance after use.Beard trimming
...
... using the beard trimming attachment
B
(width 30 mm).
9
1 If necessary, remove the attachment
by pressing in both side catches
and lifting off.
2
Insert beard trimming attachment
carefully at the top and press down
until it clicks into place.
3 Loosen the beard hair by combing
the beard in the direction the hair
grows.
4
Press the
appliance.
button to switch on the
C
button to switch off the
C
button to switch on the
C
ENGLISH 27
B
9