Grundig MT 6742 Manual Del Usuario página 28

OPERATION ______________________________
5
Begin use.
6
Press the button to switch off the
C
appliance after use.Trimming hair or
beards to a certain length ...
... using the comb attachments
.
6
Comb #1
Comb #2
Comb #3
Comb #4
Comb #5
Comb #6
Comb #7*
*
is designed for thinning out hair.
1
If necessary, remove the attachment
by pressing in both side catches
and lifting off.
2
Insert attachment
or (width 30 mm) carefully at
9
the top and press down until it clicks
into place.
28 ENGLISH
to
1
2 mm
4 mm
8 mm
12 mm
16 mm
20 mm
B
(width 38 mm)
A
Note
The comb attachments fit both cut-
7
ting heads.
3
Push the comb attachment carefully
and firmly onto the rounded rear half
of the cutting head from above and
let it click into place.
4
Press the button to switch on the
C
appliance.
5 Begin use.
6 Press the button to switch off the
C
appliance after use.
7 After use, remove the comb attach-
ment to
1 6
ing tab at the back and removing the
comb attachment.
Thinning out hair ...
... using the comb attachment
ning to a length of 2 mm).
1
If necessary, remove the attachment
by pressing in both side catches
and lifting off.
2
Insert attachment
or (width 30 mm) carefully at the
9
top and press down until it clicks into
place.
3
Push the comb attachment
fully and firmly onto the rounded
rear half of the cutting head from
above and let it click into place.
by pressing the lock-
(thin-
7
(width 38 mm)
A
care-
7
B