Important Instructions; Tools And Materials; Before You Begin - Kohler K-21336-G Guía De Instalación Y Cuidado

IMPORTANT INSTRUCTIONS

WARNING: Risk of scalding. KOHLER low-flow
showerheads/handshowers are designed for use with
compatible KOHLER valves. When installing a low-flow
product to an existing showering system, verify compatibility
before showering. Do not use this KOHLER low-flow product
with a shower valve that allows the water temperature to
become too hot when other plumbing products are used.
Before using your shower, verify that your new
showerhead/handshower is compatible with your shower valve
(located behind the wall) by performing the following steps:
While standing outside the shower, turn on the shower valve. Do
not step into the shower.
Adjust the water to your typical showering temperature.
Have someone flush the nearest toilet.
With your hand, carefully check the water temperature, from the
showerhead/handshower while the toilet is refilling.
If the water becomes significantly hotter, you will need to either
replace the shower valve with a compatible KOHLER valve or
return your showerhead/handshower.

Tools and Materials

Before You Begin

Observe all local plumbing and building codes.
The appearance of the handshower may differ from the
illustration. The instructions still apply.
1338002-2-A 2 Kohler Co.