Led Indicators - Axis Q60-E Serie Guia De Instalacion

AXIS Q60-E Series
Sunshield
1
Screw holes
2
Holes for unit holders

LED Indicators

Status LED
Unlit
Green
Amber
Amber/Red
Red
Connectors and buttons
For specifications and operating conditions, see page 13.
Network connector
RJ45 Push-pull Connector (IP66) with High Power over Ethernet (High PoE).
NO TICE TICE
NO NO TICE
Use the supplied midspan.
NO NO TICE NO TICE TICE
The product shall be connected using a shielded network cable (STP). All cables connecting
the product to the network shall be intended for their specific use. Make sure that the
Indication
Connection and normal operation.
Steady green for 10 seconds for normal operation after startup
completed.
Steady during startup. Flashes during firmware upgrade or reset
to factory default.
Flashes amber/red if network connection is unavailable or lost.
Firmware upgrade failure.
12