Mounting The Hanging Rope - PULOX PO-100 Manual De Instrucciones

4.2 Battery
Step 1: Refer to Figure 3 and insert the two AAA size batteries properly in
the right direction.
Step 2: Replace the cover.
Please take care when you insert the batteries for the improper
insertion may damage the device.

4.3 Mounting the Hanging Rope

Step 1: Put the end of the rope through the hole.
Step 2: Put another end of the rope through the first one and then tighten it.
4.4 Accessories and software description
A. Hanging rope, pouch, silicone protector, batteries (optional), user manual
Please check the device and accessories according to the list to avoid
that the device can not work normally.
B. Software description
 Software name: CMS50DL embedded software
 Software specification: no
 Release version: V2.0
 Naming rule for version: V <Major enhancive software upgrade>.<Minor
enhancive software upgrade>.<Improvement software upgrade>
 Involved algorithm: name: plethysmography; type: mature arithmetic
 Purpose: be used to measure SpO2, pulse rate, etc.
Figure 3. Batteries Installation
Figure 4. Mounting the hanging rope.
EN