Technical Data; Noise/Vibration Information; Declaration Of Conformity - Bosch PKS 40 Manual Original

OBJ_BUCH-179-004.book Page 16 Friday, April 12, 2013 9:22 AM
16 | English
3 Allen key
4 Auxiliary handle (insulated gripping surface)
5 Scale for mitre angle
6 Wing bolt for bevel-angle preselection
7 Wing bolt for parallel guide
8 Cutting mark, 45°
9 Cutting mark, 0°
10 Parallel guide
11 Retracting blade guard
12 Riving knife
13 Base plate
14 Wing bolt for cutting depth preselection
15 Cutting-depth scale
16 Blade guard
17 Sawdust ejector
18 Handle (insulated gripping surface)
19 Saw spindle*
20 Clamping flange
21 Saw blade*
22 Mounting flange
23 Clamping bolt with washer
24 Open-end spanner, size 22 mm
25 Screw for attachment of riving knife
26 Set of screw clamps*
27 Guide-rail adapter*
28 Guide rail*
29 Connection piece*
30 Vacuum hose*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.

Technical Data

Circular Saw
Article number
Rated power input
Output power
No-load speed
Rotational speed under load,
max.
Riving knife thickness, max.
Cutting depth, max.
– for 0° bevel angle
– for 45° bevel angle
Base plate dimensions
Saw blade diameter, max.
Saw blade diameter, min.
Blade thickness, max.
Tooth thickness/setting, max.
Tooth thickness/setting, min.
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
1 609 92A 06G | (12.4.13)
Circular Saw
Mounting bore
Weight according to
EPTA-Procedure 01/2003
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.

Noise/Vibration Information

Measured sound values determined according to EN 60745.
Typically the A-weighted noise levels of the product are:
Sound pressure level 97 dB(A); Sound power level
108 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a
determined according to EN 60745:
a <2.5 m/s
h
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly in-
crease the exposure level over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working pe-
riod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep hands warm, organise work patterns.

Declaration of Conformity

PKS 40
We declare under our sole responsibility that the product de-
3 603 C28 0..
scribed under "Technical Data" is in conformity with the fol-
W 600
lowing standards or standardization documents: EN 60745
W 350
according to the provisions of the directives 2011/65/EU,
-1
min 4500
2004/108/EC, 2006/42/EC.
Technical file (2006/42/EC) at:
-1
min 2450
Robert Bosch GmbH, Postfach 10 01 56,
D-70745 Leinfelden-Echterdingen
mm 1,5
Dr. Egbert Schneider
Senior Vice President
mm 40
Engineering
mm 26
mm 120 x 260
mm 130
mm 122
Robert Bosch GmbH, Power Tools Division
mm 1.4
D-70745 Leinfelden-Echterdingen
Leinfelden, 10.01.2008
mm 2.7
mm 1.7
mm
kg
(triax vector sum) and uncertainty K
h
2 2
, K=1.5 m/s .
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
Bosch Power Tools
PKS 40
16
2.4
/ II