Tabla de contenido
Publicidad
11. BAND CONTROL
In Tuner mode, press this button to cycle through Bands:
FM1, FM2, FM3, AM1 (MW1) or AM2 (MW2).
12. MENU
Press to access the system menu. See Page 8 for menu
options.
13. TUNE UP/DOWN, FILE & TRACK UP/DOWN &
FAST FORWARD/BACK
a) TUNE UP/DOWN. In tuner mode, press this button
to Auto Seek to the next station or press and hold this
button to manually tune in to your desired station.
b) FILE & TRACK UP/DOWN. In USB/SD media playback
mode, press these buttons to skip a chapter, track or file.
c) FAST FORWARD/BACK. In USB/SD media playback
mode, press and hold momentarily to fast forward/rewind.
14. SOURCE BUTTON/ POWER ON OR OFF
Press the Source Button to cycle through the following
sources if available: Radio: USB: SD: AUX: BT
Hold and press to power on or power off.
AUDIO FUNCTIONS
Audio functions are easily accessable on the ML500BT.
AUDIO MENU. Press the AUDIO BUTTON (button 5)
to access the Audio Menu mode. Then press ENTER
or TUNE UP
to select the Audio Function to be
adjusted, then rotate the ENCODER VOLUME CONTROL
to select the desired setting. You can always return to the
previous Audio Function by pressing the TUNE DOWN
button.
REMINDER
In the AUDIO MENU, or in any menu, you can quickly exit the
menu by pressing the ESC button
EBX ON/OFF:
Turn ON or OFF the EBX (Encounter Bass
Xtender) Bass Boost.
BAS (Bass)
Adjust the Bass level between -7 to +7.
TRE (Treble)
Adjust the Treble level between -7 to +7.
BAL (Balance)
Adjust the balance between the right and left
speakers from 12R (full right) to 12L (full left).
FAD (Fader)
Adjust the fader between the front and rear
speakers from 12R (full rear) to 12L (full front).
(SUBWOOFER)
SW ON/OFF
Turn On or Off the Subwoofer RCA output.
SW LPF
Subwoofer low pass crossover: 80/120/160Hz
SWAM ON/OFF
In AM mode, turn ON or OFF the Sub
output.
7
Publicidad
Tabla de contenido
