Media Playback (Usb/Sd); Usb Operation - Fusion CA-ML500BT Manual Del Usuario

Tabla de contenido

Publicidad

frequency.
4. To Manually tune to a radio station, press and hold either the
TUNE UP or DOWN
on the LCD display starts flashing. You can then release the TUNE
UP or DOWN button, and press it again repeatedly until you
select your desired frequency. After 5 seconds, the display will
stop flashing and the unit will be tuned in to that station.
HOW TO STORE YOUR FAVOURITE STATIONS
1. Select you preferred Band. Generally you would use FM1 or
AM1 to save you favourite stations (6 stations per band). If you
need to store more stations, you can use FM2/3 or AM2 for AM
stations.
2. Tune in to your preferred station as per the steps above
3. Press and hold one of the Preset Station Buttons (1-6) for 2
seconds to store the station. The preset number and [SAVED] will
be dislayed on the LCD screen.
TUNE TO A SAVED or PRE-SET STATION
1. Select the relevant BAND
2. Press the Preset Station Number corresponding to your
required Pre-Set station.
button until the tuner frequency
MEDIA PLAYBACK
(USB/SD)
MEDIA PLAYBACK
Use the following functions during media playback:
• Press
to pause the music playback. Press this
button again to resume music playback.
NOTE the volume level can be adjusted while the unit is
paused
• Press the
to skip forward to the beginning of
the next or previous chapter/track.
• Press and hold to fast forward or fast rewind through
the track.

USB OPERATION

Insert the USB Device
1. Open the cover marked
2. Insert the USB device into the USB socket. The unit will
start playing from the USB device automatically.
Removal of the USB Device
Before removing the USB device from the front panel,
on the front panel.
9

Publicidad

Tabla de contenido
loading

Tabla de contenido