Tabla de contenido
Publicidad
NOTE
If the Subwoofer RCA output is set to "OFF", then the SW LPF &
SWAM functions will not be displayed.
EQUALISER OPERATION
When you activate the Equaliser, the Pre-Set Equaliser settings
override your existing Bass, Midrange & Treble Settings.
Press the Equaliser button repeatedly to cycle through the
following pre-sets: FLAT->POP->USER->DANCE->ROCK-
>CLASSIC->JAZZ->VOCAL
To return to the Bass & Treble settings that were in use before
the EQ was selected, please select the USER setting.
SYSTEM MENU
Press
(MENU) to access the System Menu and press
again to select the item be adjusted, then rotate Encoder
Volume Knob to select a value / option. To exit this menu
at any time, press the ESC button
STORE (Auto store)
While in Tuner mode, press the ENCODER VOLUME
CONTROL to activate Auto Store. The six strongest stations
of the selected band will be saved in the preset channels
automatically
LOC* ON/OFF
(Local/Distance). Use this setting to Auto Seek to strong
local stations (Local) or all stations regardless of their
strength (Distance).
8
AREA
Select your country/region for the tuner:
OCEANIA (Australia/New Zealand); USA; EUROPE;
RUSSIA & press ESC
CLK (Clock)
To set the clock, rotate the Encoder Volume Control to
set the hours (Note "A" or "P" will be displayed in the
top-right hand of the LCD display indicating AM or PM if
the clock is in 12H mode – see below). Press the Encloder
Volume control to select "minutes" then rotate the control
to set.
CLK 12H/24H (Clock Format)
Select the time format 12H or 24H
BEEP ON/OFF
Select On or Off to activate button confirmation beep
tones.
RADIO OPERATION
TUNE INTO A RADIO STATION
1. Press the SOURCE button
displayed on the LCD screen.
2. Select your preferred listening Band (FM or AM) by pressing
BAND. There are 3 FM Bands [FM1] [FM2] [FM3] and 2 AM Bands
[AM1] [AM2]. These multiple Bands allow you to store up to 18
FM stations & 12 AM stations in memory (see below).
3. To search for a radio station, press either the TUNE UP or
DOWN
buttons to search for the next station higher
than the current station frequency or lower than the current
to save.
repeatedly until [RADIO] is
Publicidad
Tabla de contenido
