Reset Button; Signal Strength Indicator - Grundig G5 El Manual Del Propietario

G5 OWNER'S MANUAL
REAR FOLDING STAND
Pull the folding stand from the rear of the G5, allowing viewing at a
comfortable angle.

RESET BUTTON

The reset button is located inside the small hole labeled RESET. If the
G5 operates erratically, poke a paper clip into the reset hole to reset
its microprocessor. This does not erase memory, but does reset the
clock to 0:00.
USING THE LOCK FEATURE
With the G5 turned off, one press of the lock button prevents un-
wanted turn-on. When it is turned on, one press of the lock button
prevents unwanted frequency changes; two presses lock all buttons
except the POWER/SLEEP button. Deactivate lock with a long (about
2 second) press of the lock button.

SIGNAL STRENGTH INDICATOR

The signal strength indicator shows relative strength of AM and SW
signals. When signal strengths are somewhat weak, it is normal for
the indicator's level to fluctuate. The indicator is not functional with
FM signals.
16