Furnished Accessories - Shure Microflex MX395 Manual De Instrucciones

Low-Profile Boundary
Microphone
General Description
Shure MX395 low-profile microphones are for
®
use in boardrooms and other sites where aesthet-
ics are important. The MX395 is only 2.5 cm (1
in.) in diameter, and extends just 2 cm above the
mounting surface when installed. Despite its small
size, the MX395 delivers clear, high quality sound.
Features
• Low profile, aesthetic design
• Wide dynamic range and smooth frequency
response
• RF filtering with CommShield
®
• Available with logic-controlled bi-color status
indicator
Model Variations
The MX395 is available in cardioid, omnidirection-
al, and bidirectional polar patterns, with or without
an LED status indicator, with a black, white, or
aluminum finish.

Furnished Accessories

Wing Nut Rubber Isolation Ring
65A2190
5-pin XLR, Female
(MX395-LED variations)
95A2529
All manuals and user guides at all-guides.com
Microphone Placement
For best low-frequency response and rejection
of background noise, place the microphone on
a large, flat surface, such as a floor, table, or
lectern.
To reduce reverberance, avoid reflective surfaces
above or to the side of the microphone, such as
beveled sides of pulpits or overhanging shelves.
MX395/C
130° @ -3dB
MX395/BI
2 x 90° @ -3dB
technology
MX395/O
360° @ -3dB
The polar pattern is indicated by the molded grille.
Cardioid
66A405
Polar Patterns
Omnidirectional
Bidirectional
Installation
Install the microphone into a tabletop as shown.
Important:
• Align indentation
toward talker
• Do not over tighten
the wing nut, as
this reduces shock isolation
LED Logic
For models equiped with an LED, use the includ-
ed 5-pin XLR connector to wire the microphone to
an automatic mixer or other logic device.
Note: Connect the LED IN to the gate output to il-
luminate the LED when the channel is gated on.
LED
Green
0 V DC
LED
Red
5 V DC
3