ODL BRISA Instrucciones De Instalación página 6

Insert the other end of the tracks
into the latch hook housing.
STEP 2
INSERT SCREEN
Place screen assembly onto door
sill and lift into place.
Flush and short sill – Assembly
rests in a position where top of
track is flush with edge of sill.
Long sill – Assembly rests in a
position on top of sill.
5
Sill Plate
Assembly
Bottom Track
Slide sill plate assembly onto bottom track.
Do not deploy screen until it is assembled to doorway.
When installing the screen assembly
make sure the housing flange is snug
to the end/edge of the door jamb.