Tabla de contenido
Publicidad
Center sill plate assembly on the door sill.
Slide sill plate assembly extenders to each
side to fill gaps.
4"
10"
10"
4"
Extend housings to the left and right
evenly until snug to the door inside trim.
STEP 3
SECURE SCREEN
Insert a housing screw into the pre-drilled
screw hole at the top of the housing
flanges on both sides to hold frame in
place. Do not tighten completely.
Interior View
Drive sill screws 4" from either end and
10" to the left and right of center.
6
Publicidad
Tabla de contenido
