Operation; Care And Cleaning - Glacier bay 67420-3001 Guía De Uso Y Mantenimiento

Operation

1
Flushing and checking for leaks
IMPORTANT: After installation is complete, remove the
aerator to ush the water lines. Do not lose the gasket (1) in
the aerator.
□
Turn on the water supply and allow both hot
and cold water to run for at least one minute
each. This ushes away any debris that could
cause damage to internal parts.
□
While the water is running, check for leaks.
□
Turn off the water and replace the aerator.

Care and Cleaning

□
□
□
Do not use abrasive cleaners when cleaning this faucet.
1
8