• Each time you press the button, the indication on the
display changes as follows:
ALL DISC
1 DISC
(initial setting)
REPEAT ALL
DISC*
*
See page 19.
3
Press one of the disc number
buttons (CD1, CD2 or CD3)
for the disc you want to start
to play from.
CD play starts from the first track of
the selected disc.
• Pressing CD 6 instead of the disc number buttons
starts playing back if a CD is on the tray.
For Audio CD:
Track number of the currently playing disc flashes
(Track numbers exceeding 16 are not displayed.)
TRACK
Current track number
For MP3 disc:
• When the MP3 playback mode is the ALBUM mode
(See also page 17.)
Current album number
GROUP
Current track title scrolls.
GROUP
When the track includes the ID3v1/1.1 tags, "Title" and
"Artist" will scroll after the track title.
• " < TITLE > " appears before the content of "Title" scrolls and
" < ARTIST > " appears before the content of "Artist" scrolls.
Current track number
of the current album
GROUP
REPEAT
1*
REPEAT 1
DISC*
ALL
DISC
Elapsed playing time
MP3
ALL
DISC
MP3
ALL
DISC
Elapsed playing time
MP3
ALL
DISC
• When the MP3 playback mode is the TRACK mode
(See also page 17.)
Current track title scrolls.
When the track includes the ID3v1/1.1 tags, "Title" and
"Artist" will scroll after the track title.
• " < TITLE > " appears before the content of "Title" scrolls and
" < ARTIST > " appears before the content of "Artist" scrolls.
Current track number**
** In the TRACK mode, the unit manages only files (tracks) on the
MP3 disc. Folders (albums) are not recognized.
To stop during play, press 7.
• For MP3 disc, this unit can store the number of the track
that you have stopped playback. By pressing CD 6, you
can start playback again from the beginning of the same
track—Resume play (see also page 17).
To remove the disc, press CD 0.
CD playback sequence
When 3 CDs are loaded on the disc trays, they are played in one of
the following sequences.
• When CD1 is pressed : CD1 ] CD2 ] CD3 (then stops)
• When CD2 is pressed : CD2 ] CD3 ] CD1 (then stops)
• When CD3 is pressed : CD3 ] CD1 ] CD2 (then stops)
* When only 2 CDs are loaded, they are played in the same order,
but the disc tray without a CD is skipped.
About the CD READY lamps (CD1, CD2, and CD3)
• Each lamp corresponds to the disc tray of the same number.
• The CD READY lamp flashes while the corresponding CD is
being played.
• The CD READY lamp goes off when the unit has detected that
there is no CD on the corresponding disc tray.
Continued
MP3
ALL
DISC
Elapsed playing time
MP3
ALL
DISC
14