Connecting The Power Supply - Creative SoundBLASTER AE-9 Manual De Instrucciones

Connecting The Power Supply

Ensure that the 6-pin PCI Express
power supply connector's latch is
properly fitted into the sound card
connector's catch.
Catch
4 1
5 2
3
6
GND +12V
+12V
GND
PC Power Supply Unit
Sound Card Connector
Pin Definition
1 +12 VDC
2 +12 VDC
3 +12 VDC
4 Ground (G)
5 Ground (G)
6 Ground (G)
Note:
- Only the use of PCI Express 6-Pin Connector is permitted.
- The PCIe connector must be connected to the sound card in a Pin-to-Pin matching configuration.
- DO NOT forcefully link the connectors if they do not fit.
- DO NOT connect ATX 4Pin/P4/EPS Connectors to the Sound Card's PCI Express Connector.
Doing so will cause damage to the Sound Card and / or PC / Power supply.
Power supply unit must be 80 PLUS Bronze certified with a minimum of 500 watts power
^
output and a 2 x 6 PCIe connector.
^
Power Supply PCI
Express Connector
Pin Definition
Latch
1 +12 VDC (Yellow)
1 4
2 +12 VDC (Yellow)
2 5
3 +12 VDC (Yellow)
6
3
4 Ground (G) (Black)
+12V GND
5 Ground (G) (Black)
6 Ground (G) (Black)