Flex DW 45 18.0-EC Instrucciones De Funcionamiento Originales página 23

DW 45 18.0-EC
Push coupling towards rear (1.).

Insert screwdriver bit into the bit holder (2.).

Release coupling.

Stop sleeve
Attach stop sleeve to drywall

screwdriver.
Remove stop sleeve from drywall

screwdriver.
NOTE!
The stop sleeve is not required to loosen
screws.
Screw magazine
WARNING!
Remove the battery before carrying out any
work on the power tool.
CAUTION!
Before performing any work on the electric
power tool, move the lever for selecting
direction of rotation (3) to the middle
position.
Push coupling towards rear (1.).

Insert screwdriver bit into the bit holder (2.).

Release coupling.

Attach the screw magazine:
Press lock button and insert carriage into

guide.
Attach screw magazine to drywall

screwdriver.
Remove the screw magazine:
Press lock button and pull out carriage.

23