Flex DW 45 18.0-EC Instrucciones De Funcionamiento Originales página 24

Remove screw magazine from drywall

screwdriver.
Insert screw belt
Insert screw belt from underneath.

Changing screw-in depth
Stop sleeve
CAUTION!
Before performing any work on the electric
power tool, move the lever for selecting
direction of rotation (3) to the middle
position.
Change screw-in depth by turning the

stop sleeve for the screw depth stop.
– Turn clockwise: Screw-in depth
increases
– Turn anti-clockwise: Screw-in depth
decreases
24
One notch (45°) on the adjusting sleeve
corresponds to a change in the screw-in
depth of 0.2 mm.
One complete rotation (360°) of the
adjusting sleeve therefore corresponds to
a change in the screw-in depth of 1.6 mm.
NOTE!
Start with a fairly low screw-in depth to prevent
damaging the workpieces which are to be
screwed in place.
Screw magazine
CAUTION!
Before performing any work on the electric
power tool, move the lever for selecting
direction of rotation (3) to the middle
position.
Press setting button and adjust screw

length manually.
DW 45 18.0-EC