Machine Information; Technical Specifications - Ferm CDM1113S Traducción Del Manual Original

2. MACHINE INFORMATION

Intended use
This cordless drill is intended for driving in and
loosening screws as well as for drilling in wood,
metal and plastic.

Technical specifications

Model No
Charger
Input of charger
Output of charger
Rechargeable Battery pack
Battery charging time
Chuck capacity
Torque settings
No load speed
Position 1:
Position 2:
Weight (incl. battery)
Sound pressure level L
PA
Sound power level L
WA
Hand-arm vibration a
h
(screwdriving without impact)
Hand-arm vibration a
h,D
(Drilling into metal)
Vibration level
The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardized test given in
EN60745; it may be used to compare one tool
with another and as a preliminary assessment of
exposure to vibration when using the tool for the
applications mentioned.
• Using the tool for different applications, or with
different or poorly maintained accessories,
may significantly increase the exposure level.
• The times when the tool is switched off or
when it is running but not actually doing the
job, may significantly reduce the exposure
level.
CDM1113S CDM1114S
CDA1080S
230-240 V ~ 50Hz 45W
10.8-18V DC 2A
14,4 V 18 V
Li-ion 1.5Ah Li-ion 1.5Ah
1 hour
0.8 - 10 mm
23 + Drill mode
0-400 /min
0-1400 /min
1,44 kg 1,50 kg
66.23 dB(A) 66.40 dB(A)
K=3 dB(A) K=3 dB(A)
77.23 dB(A) 77.40 dB(A)
K=3 dB(A) K=3 dB(A)
0.627m/s 0.846m/s
2 2
K=1.5 m/s K=1.5 m/s
2
1.454 m/s 1.843m/s
2 2
K=1.5 m/s K=1.5 m/s
2 2
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work
patterns.
Description
The numbers in the text refer to the diagrams on
pages 2- 4
Fig. A
1. Machine
2. Battery
3. Battery unlock button
4. Battery charge indication
5. Charger
6. Charger LED indicators
7. Chuck
9. Gear selection switch
10. Direction switch
11. On / off switch
12. Torque adjustment ring
13. Work light
14. Belt hook
Lithium-Ion technology
The batteries provided with this machine have
Lithium-Ion technology.
One advantage of using Lithium-Ion
batteries is that, until the battery is almost
empty, hardly and power fading is
noticeable. The machine can be used
until you start noticing that the power of
the drill is elapsed. The battery is
discharged now and needs to be
charged.
Another advantage is that Lithium-Ion
batteries have no memory effect.
Therefore they can be charged at any
moment without degrading, independent
of the charging state of the battery.
7