UK
Service
Chassis/seat unit/carry cot function
Check that the chassis locks function on both sides.
Check that the safety catch/safety buttons function correctly
by folding the pram and checking that the safety catch/safety
buttons are activated to prevent accidental folding.
Check the harness function on the seat unit by locking and
unlocking the harness.
Check the handle height adjustment function by adjusting the
handle up and down. The handle should lock securely into
each position.
Check that the backrest can be adjusted and locks securely
into each of its three positions.
Check that the footrest can be adjusted and locks securely
into each of its two positions.
Wheels and brakes
Check that the wheels are removable and that they lock onto
the axles
Check that the brakes lock both rear wheels
Visual overview
Check that all rivets and screws are tightened correctly
Check that all buttons and zippers are intact and correctly
fastened
Check for any other visible deviations on the chassis, fabrics,
tray and wheels
Lubrication
Clean and lubricate the wheels, axles, chassis locks, footrest
and the safety catch
Other notes (further adjustments or changed details)
Manual Scooter 4 / Scooter 4 S v. 4.8
Service Protocol
6 mon 12 mon 24 mon 36 mon
49