Switching Off The Water Management System - Hilti DD-WMS 100 Manual De Instrucciones Original

WARNING
Risk of hazards through use of the product not as directed.
▶ This appliance is not suitable for picking up hazardous dust.
CAUTION
Risk of hazards through use of the product not as directed.
▶ Use the power outlet on the appliance only for the purposes described in these operating
instructions.
WARNING! Risk of damage to the equipment or other property.
▶ Switch the product off immediately if foam or liquid escapes from it.
WARNING
Danger of electric shock! Carrying out care and maintenance while the supply cord is connected to
the power outlet presents a risk of serious injuries including burns.
▶ Always unplug the supply cord before carrying out all care and maintenance tasks.
1. Connect the hose set to the diamond coring machine. → page 16
2. Set the control switch to the desired operating mode.
3. If the following equipment exists, also take this action:
Option: Vacuum cleaner mode
▶ Set the control switch to Vacuum mode.
Note
The water management system is designed to be used only for small vacuum cleaning jobs
such as cleaning up the working area. Do not use this appliance in vacuum cleaner mode for
system applications in combination with electric tools.
4. If the following equipment exists, also take this action:
Option: Water supply
▶ Set the control switch to the Water supply position.
▶ Open the water valve on the diamond core drilling machine.
◁ The water supply is controlled by the water valve on the diamond core drilling machine.
5. If the following equipment exists, also take this action:
Option: Recycling
▶ Set the control switch to the Recycling position.
◁ Vacuum removal begins.
▶ Open the water valve on the diamond core drilling machine.
◁ The water supply is controlled by the water valve on the diamond core drilling machine.

6.2 Switching off the water management system

▶ Set the control switch to OFF.
6.3 Removing the filter bag
1. Open the two catches.
2. Lift the top section of the appliance away from the water and waste material container.
Note
Sharp or pointed objects that have pierced through the filter bag may present a risk of injury.
Check to ensure that the filter bag has not been pierced by sharp or pointed objects. Carefully
remove the filter bag from the filter bag holder in the water and waste material container.
3. Close the filter bag with the cap that's attached to the bag.
4. Remove the filter bag.
5. Fit the top section of the appliance onto the waste material container.
Printed: 12.06.2017 | Doc-Nr: PUB / 5306545 / 000 / 03
5
English 17