Moving; Malfunctions; Regular Maintenance - Kramp PTS2500KR Traducción De Las Instrucciones Originales

d. Moving
• Do not operate the truck on a slope or inclined surface.
• Watch difference of floor level when moving lifter. Load could fall down
• Make the load stable to prevent it from falling down.
• The truck might be not equipped with a brake. In this case the braking distance is longer and depends on the operator
If equipped, release the brake. Move the truck by pushing or pulling the tiller arm. The tiller arm is connected to the steering
rollers. The wheels are steered automatically by moving or steering the tiller arm.
e. Malfunctions
If there are any malfunctions or the truck is inoperative, please stop using it. Place the truck at a safe place. Avoid further usage.
Inform immediately the manager and, or call your service.

7. REGULAR MAINTENANCE

• Only qualified and trained personnel are allowed to do service on this truck.
• Before servicing the truck, remove the load and lower the forks to the lowest position.
• Completely immobilize pallet truck before working on components that might pinch fingers or hands if movement were allowed.
• Use approved and from your dealer released original spare parts.
• Please consider that oil leakage of hydraulic fluid can cause failures and accidents.
• It is allowed to adjust the pressure valve only from trained service technicians.
• Waste material like oil, used batteries or other must be probably disposed and recycled according to the national regulations
and if necessary brought to a recycling company.
• All bushings and bearings have been lubricated at the factory. To increase their life, regular maintenance is recommended.
Using the appropriate grease for the application and lubricate each grease fitting every 6 months.
• Harsh environments may require more frequent maintenance.
If you need to change the wheels, please follow the instructions above. The wheels must be round and they should have no
abnormal abrasion.
www.kramp.com www.kramp.com
13
GB